Infusion Page 4

Keeping track of a slow spot at the bow

Trimmed hull with pigmented fill coats partially faired.  The hull edge was trimmed with a Makita cordless panel saw. A carbide blade was set to the thickness of an equivalent test panel. While cutting, the hull was wedged away from the mold using old squeeges..

The inside finish is, well, finished.  Too bad it won't turn inside-out...

Waiting for the deck.

[infusion page 1] [infusion page 2] [infusion page 3] [Infusion page 4] [Infusion page 5] [Infusion page 6] [Infusion page 7] [Infusion page 8][Thag-o-mizer home]